Bug Remover - Fast & Safe Bug Removal
Did you know bug guts are highly acidic and can stain and damage your clear coat if you leave them to bake in the sun? Our Bug Remover is a ready‑to‑use, fast‑acting alkaline cleaner that breaks down bug proteins and neutralizes acidity so you can rinse away stubborn bug remains with minimal scrubbing. Safe on paint, glass, chrome, and polished aluminum. Turning a bug‑splattered grille or bumper into a quick and easy clean‑up.
WHAT MAKES BUG REMOVER DIFFERENT
Most “all‑purpose” cleaners and cheap bug sprays do very little to remove baked‑on bug remains. Or they’re harsh enough to risk damage to your clear coat, plastics, or polished metals. Bug Remover is formulated specifically for breaking down bug proteins using a fast‑acting alkaline blend that softens and loosens the contamination so it can be gently agitated and rinsed away.
Because it’s designed for use on real trucks and trailers that run thousands of miles, we made sure it’s safe and effective on all common exterior surfaces—including polished aluminum—when used as directed. That means you can focus on cleaning the mess, not worrying about what it’s doing to your finish.
RECOMMENDED USE ROUTINE
- Work in the shade on a cool surface whenever possible to prevent premature drying.
- Lightly rinse the area first if there is heavy loose dirt or dust present.
- Spray Bug Remover directly onto bug‑covered areas such as grilles, bumpers, mirrors, windshields, and front caps.
- Allow the product to dwell for 1–2 minutes; do not let it dry on the surface.
- Gently agitate with a brush or wash mitt to help break up stubborn remains.
- Rinse thoroughly with clean water until all product and residue are removed.
- Follow with your preferred wash soap or full wash routine for best overall results.
EQUIPMENT & SETUP RECOMMENDATIONS
Bug Remover is ready to use, so it works great with simple, easy‑to‑deploy tools you probably already own. For larger vehicles or frequent use, a dedicated sprayer setup makes the job even faster.
- Standard trigger sprayers for spot treatment on grilles, mirrors, bumpers, and front caps.
- 1–2 gallon pump sprayers for RVs, box trucks, and semi‑truck fronts.
- Use with Image's Automatic Bug Remover Pump System for optimized performance.
- Use soft bristle brushes, high‑quality wash mitts, or bug sponges for gentle agitation on stubborn areas.
- Use with your usual pressure washer or hose for final rinsing as part of your normal wash process.
- Avoid foam cannons, since they will over‑dilute this ready‑to‑use formula and reduce performance.
Image Wash Products (Formerly Reflections Wash Products)
Bug Remover at a glance
| Chemistry | Ready-to-use alkaline bug remover, pH 10.5–11.5 |
|---|---|
| Pair with | Follow with your wash soap or 2-step |
| Polish-safe | Safe on polished aluminum, chrome, plastic and painted finishes when used as directed |
| Soap injector setup | Not for soap injectors or foam cannons. Apply with a trigger or pump sprayer. |
| Final strength at the injector | Ready to use |
| Shipping class | Not regulated as a hazardous material for U.S. ground transport (SDS Section 14). |
| Safety Data Sheet | Download the Bug Remover SDS (PDF) |
Injector setup and strength come from our Soap System Calculator. Enter your pressure washer's PSI and GPM there to get the right metering tip.
Use it on
- Fronts, mirrors, grilles and bumpers on cars, trucks and RVs
- Prep before your normal wash
Keep it off / avoid
- Foam cannons and soap injectors, which over-dilute it
- Letting it dry on the surface
Bug Remover FAQs
Can I put Bug Remover in a foam cannon or injector?
No. It is ready to use and should be applied with a trigger or pump sprayer. Foam cannons and injectors over-dilute it.
Is it safe on paint and polished aluminum?
Yes, when used as directed.
Do I wash after using it?
Yes. Follow with your normal wash soap or touchless 2-step.
